BLDTC - PORAPAK R 50/80 75CC MESH
- MSDS: BLDTC
- Manufacturer: SUPELCO INC
- Product Name: PORAPAK R 50/80 75CC MESH
- National Stock Number: 6810-00N019116
Product Identification
Product ID:PORAPAK R 50/80 75CC MESH
MSDS Date:10/21/1988
FSC:6810
NIIN:00N019116
MSDS Number: BLDTC
Responsible Party
BELLEFONTE, PA 16823-0048
US
Emergency Phone: 814-359-3441
Info Phone: 814-359-3441
Cage: 54968
Contractor
Telephone: 314-771-5765/414-273-3850X5996
Cage: 54968
Ingredients
DVB, DEB, N-VINYLPYRROLIDINE COPOLYMER
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY IRRITATE EYES AND/OR SKIN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: FLUSH WITH
LARGE VOLUMES OF WATER. INHAL: IMMED MOVE TO FRESH AIR. INGEST:
SEEK MD IMMED .
Fire Fighting
Extinguishing Media:CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT WHEN FIGHTING A CHEMICAL FIRE.
Unusual Fire/Explosion Hazard:THE FOLLOWING TOXIC VAPORS ARE FORMED
WHEN THIS MATERIAL IS HEATED TO DECOMPOSITION: OXIDES OF NITROGEN.
Accidental Release
Spill Release Procedures:SWEEP UP MATERIAL. AVOID GENERATING DUST.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN SEALED CONTAINER IN COOL, DRY
LOCATION. AVOID GENERATING DUST.
Exposure Controls
Ventilation:USE ONLY IN WELL VENTILATED AREA.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>482F,>250C
Vapor Pres:0.0
Evaporation Rate & Reference:0.0(REF:N/K)
Solubility in Water:0.0
Appearance and Odor:FINE WHITE POWDER.
Percent Volatiles by Volume:0.0
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:NOT APPLICABLE. PRODUCT HAS BEEN
RIGOROUSLY EXTRACTRED TO REMOVE UNREACTED MONOMERS.
Hazardous Decomposition Products:OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:COMPLY WITH ALL APPLICABLE FEDERAL, STATE OR
LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.